Your browser is out of date, and may not be compatible with our website.
This means some functionality may not work as intended. Upgrade or install one of the following browsers to take full advantage of our website. Chrome | Firefox | Safari | Edge

support ticket - Sinalite commercial printer Create a Support Ticket

Call Sinalite | wholesale printing company Call 1-866-899-2499

Chat with Sinalite | Sinalite customer careChat with an Agent

support center | SinaliteGo to Support Center

Square Cut Labels / Stickers 60lb slit back label / Sticker Cut to individual labels (NOT on rolls)

Square Cut Labels / Stickers

60lb slit back label / Sticker Cut to individual labels (NOT on rolls)

Multi-purpose labels that offer a professional presence for your customer's products.

60lb slit back label

Paper Type

60lb Label Stock


No Coating


Full color CMYK: 1 sided (4/0)


Ranges from 100 to 5,000


2" x 3.5" 2" x 4" 3" x 4" 3.5" x 3.5" 2" x 8"
4" x 4" 8.5" x 2.75" 4" x 6" 8.5" x 3.667" 5" x 7"
5.5" x 8.5" 11 x 4.25" 6" x 9" 8.5" x 11"

Cut to individual labels (NOT on rolls)

Trim and box

File Type

Print Ready PDF file

Step 1

Step 1

Ensure the file matches the product's required dimensions. Ensure that the artwork is created in CMYK 300 dpi with 1/16 inch bleeds on all sides.

Step 2

Step 2

Make sure that all images are embedded, and that all the text is outlined.

Step 3

Step 3

Export all files into PDF format with bleeds.

Download Setup Guide

Get It Now
How to set up multi-page files properly

File Orientation Guide

Learn More
How to set up proper orientation for your files

File Orientation refers to the orientation of the artwork files submitted. Ensure that they are submitted to back up properly to produce the intended result.

Flat Artwork (Postcards, Flyers etc.)

File Orientation

How To Set Up Your Files

Learn More
Learn how to set up your files the right way.
  1. Custom Shapes

    When submitting your artwork for custom shaped labels, prepare colour and design as you would any label file. Moreover, please include the shape dieline as a spot colour called 'Dieline'. While preparing your dieline, keep note of the following:

    • Dieline must be its own layer with no other artwork in that layer
    • Dieline must be a single stroked (not filled) path; not a dashed line or series of lines making an overall shape

  2. Download Roll Labels Dieline Setup Guide
  3. White Ink

    If you select a White Ink option with your order, please supply a single file that includes CMYK (if necessary) and a spot colour called exactly White_Ink

    Do not supply separate files for CMYK and White Ink

    If you want white ink to print under a blue colour, you need to set either the blue shape or the White_Ink shape to overprint to achieve this.

    You may also want to set a White_Ink shape to knockout so nothing prints on top of it. Remember to set overprints on any Dieline.

  4. Black​Ink​Only

    If you select Black Only option on your order, the file you supply should be K only (not CMYK or RGB) with a Dieline.

General File Preparation Guidelines

  1. Download our guides to ensure a more optimal print result.
  2. Be sure to DELETE any hidden layers that are not intended to print (ie: setup guide layers or other hidden artwork layers) to ensure no risk of them appearing on the final print.
  3. Each job (including multiple paged projects) must be submitted as a single PDF file. Ensure that all pages are the same size.
  4. Files must be submitted with proper orientation to ensure proper back up. Please review the File Orientation Guides carefully in the File Prep tabs for your particular product.
  5. It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
  6. File must consist of 1/8" bleed and all important art and text must be within the safety margin. The more safety margin the better (to avoid awkwardly close trims or having critical elements from getting cut off).
  7. Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
  8. Black text/type should have the following values: C0, M0, Y0, K100.
    Larger areas of black coverage should be C:30/M:20/Y:20/K:100 to get a deep richer black. (For more info, click here)
  9. Embed or outline all fonts.
  10. For best colour results, supply a CMYK only file (unless your product type specifically requires RGB color mode or specifically requires you to supply PMS colors).
See our Support Center for more details.


Roll Labels Glossary

Learn More

Learn about important roll label terminology to make ordering easier.

  1. Adhesivity
    • Permanent labels permanently stick to the surface. Removing them may cause damage to labels or application surface.

    • Removable labels can be repositioned and removed without damaging the label or the application surface.

  2. Custom Shape Labels

    Any shape that is not a circle, oval, rectangle or square. Click here to learn how to prepare your custom shaped artwork.

  3. Diameter

    For circle shaped labels, dimensions are measured by diameter in inches.

  4. Finishing

    Lamination is a clear, plastic film applied to labels for added durability.

    • Matte lamination offers a smooth and non-gloss finish.
    • Gloss lamination offers a glossy finish.
  5. Ink Color
    CMYK Choosing CMYK is standard and for those designs that are exclusively composed of CYAN, Magenta, Yellow and Black.
    White + CMYK

    Choose this option for artwork where your artwork is CMYK but you also need to have a white color on a material that is itself not white (i.e. Silver poly and clear BOPP). The white ink can also be used as a special effect on your labels.

    Click here to learn how to prepare your artwork for White ink.

    White Only

    Only available with colored fluorescent labels.

    Click here to learn how to prepare your artwork for White ink.

    Black Only

    Only available with colored fluorescent labels.

    Click here to learn how to prepare your artwork for Black ink.

  6. Labels Per Roll

    Refers to the quantity of labels that will be included in each roll. For example, if you order 5,000 labels and select 1000 labels per roll, you will receive 5 rolls.

  7. Perforation

    The liner of the roll is perforated between labels allowing them to easily be separated.

  8. Stock

    This refers to the material of your labels on which we will print. Click here to see a comprehensive list of all of our available materials.

  9. Turnaround

    The number of business days estimated for your order to be produced. Does not include shipping time.

  10. Wind (or Rewind Direction)

    Refers to the direction that the label feeds off the roll.

    Roll label - wind direction

Download White Ink Setup Guide


How to set up White Ink in your artwork files

Common Issues

Learn More
How to avoid common file issues

How to ensure proper orientation/backup

Why bleed is necessary for print

Why you should avoid border designs

How to set up dielines

Why safety margins are necessary for print

How to create transparent PNG files


Please note: the Customer is responsible for all approvals and regulatory compliance. SinaLite is a printing company and does not approve labels nor review the content for regulatory compliance.

If your account has Auto approval enabled, your order will be auto approved within 1 hour of order being placed. Unless the file is rejected, in this case you will receive a rejection email.

Upon placing an order, you will receive a confirmation email stating that the order has been successfully placed.


After processing your order, our prepress team will review your artwork and run automated checks to ensure its print readiness. Once completed, our automated system will send you a link. This link allows you to approve the file to proceed, make changes to the file, or put the order on hold.

Caution Caution

In the event that your order has been rejected, you will receive an email notifying you of the rejection. You'll have the option to upload new artwork, place the order on hold, or cancel the order.