Create a Support Ticket
Call 1-866-899-2499
Chat with an Agent
Go to Support Center
Submit files in PNG or JPEG format with at least 150 DPI
We recommend using PNG for designs with a transparent background. For other designs, we advise preparing files in JPEG instead.
Toggle Nav
Search
Women’s T-Shirt
Next Level Ladies' Triblend Crew | 6710
Our Next Level triblend shirts for women are ready to be printed with your client's logo or design. These ladies' crewneck t-shirts are made from polyester, cotton and rayon jersey.
Fabric:
- 50% polyester/25% combed ringspun cotton/25% rayon jersey
- 7.2 oz./lin. yd.
- 32 singles
- Fabric laundered for reduced shrinkage
- Front coverstitched 1x1 baby rib-knit set-in collar
- Satin label
- Sideseamed
Sizing Chart
| S | M | L | XL | 2XL | |
|---|---|---|---|---|---|
| Width | 16" | 17" | 18" | 19.5" | 21" |
| Length | 25.5" | 26" | 26.5" | 27" | 27.5" |
| Sleeve Length | 6.75" | 7" | 7.25" | 7.5" | 7.75" |
| Disclaimer: | This is intended to be a guide only, and while we do our best to ensure all our sizing is consistent, you may find that some styles vary in size. Follow instructions on laundry tag for best care results. SinaLite is not responsible for damage caused otherwise. |
How to measure:
WIDTH: Lay garment flat. 1" below the armhole flat measure the garment across the chest.
LENGTH: Lay garment flat (face down). Measure from center back neckline seam straight down to bottom of the front hem.
SLEEVE LENGTH: Lay garment flat(face down). Measure from center back neck to outer edge of shoulder seam, then along outer edge to sleeve end.
Artwork Setup Guide
DTG Guidelines
1
2
Create files in sRGB color profile
To ensure that your design looks as close as possible to what appears on your screen, make sure you create your print file in sRGB color profile.
3
Remove print file template guidelines
If you use our downloadable templates, delete the guide layers before saving your files. If you don't delete them, they'll show up on the print.
Tips for Best Results
• Avoid semi-transparent designs
Semi-transparent graphics (or elements with lowered opacity) don't translate well in DTG printing. We advise using solid colors or simulating semi-transparency by halftoning (for more information, see our video tutorial).
• Create designs with the necessary DPI
Simply typing in a new resolution value into the file won't result in a higher resolution print. If your graphic's resolution is too low, the best solution is to recreate it.
• Use transparency to your advantage
Black ink will appear gray on black garments because of the white underbase used during printing. Leave these areas fully transparent when designing for black garments.
• Avoid borders when designing sleeve prints
We advise against using graphics with perfect borders for sleeve printing, since the print can warp slightly when the sleeve is being pulled off the pallet.
!
Disclaimers
- If images are upload with a non-transparent background, this background will appear when printed.
- We don't print white ink on white shirts. Any designs for white shirts containing white color will have areas with no print on them.
- White ink elements on bright-colored garments might look tinted. This is most evident on red, maroon, and other similarly colored garments.
- Follow instructions on laundry tag for best care results. SinaLite is not responsible for damage caused otherwise.
- There might be slight discrepancies in print placement.
