10mm Coroplast

No coating

Full colour CMYK: 2 sided (4/4)

Ranges from 1 to 200

Cut to size. H Stands and grommets are optional.

Print Ready PDF file

This product is not compatible with H-stands due to the size of the flutes (too large for the metal prongs). Selecting "H-stand compatible" will only ensure that the flutes run vertically.

Please note we do NOT sell H-Stands for 10 mm coroplast.

If the H Stand Compatible option is not selected, your order may be produced with either vertical or horizontal flutes. We cannot guarantee horizontal flutes.

Items that are H Stand Compatible have vertical flutes that facilitate H-Stands into the signs. 

If the H Stand Compatible option is not selected, your may be produced with either vertical or horizontal flutes (* unfortunately we cannot guarantee that you will get horizontal flutes. IF this is required please email us first before placing your order to confirm if it can be accommodated.)

If you are using directional arrows on your signs. Your file should be 2 pages with each arrow pointing in the opposite direction

Keep artwork in the intended proper-oriented reading orientation with the head/top of the artwork positioned at the top of the file. (DO NOT ROTATE 90 DEGREES).

Grommets:
If you select real estate grommets, the center of the grommets will be 4 inches from the left and right edges, and 1 inch from the top and/or bottom edge.
If you select corner grommets, the center of the grommets will be 1 inch from all edges.
Grommets are 0.75" in diameter.

Please Note: Though very rare, we may print your signs at 99.4% of the original size to ensure that we are able to include cut marks for proper finishing and trimming. We may also remove bleed.